Asrock 775twins-hdtv r2.0 用户手册

2 8

2.14

2.14 Making a SA

Making a SA

Making a SATTTTTA Driver Disk

A Driver Disk

A Driver Diskette F

ette F

ette For W

or W

or Windows

indows

2000 /

XP / XP 64-bit / Vista

Installation

If you want to install Windows

2000, Windows

XP, Windows

XP 64-bit or

Windows

Vista

OS on your SATA HDDs, you will need to make a SATA driver

before you start the OS installation.

STEP 1: Insert the ASRock Support CD into your optical drive to boot your system.

(Do NOT insert any floppy diskette into the floppy drive at this moment!)

STEP 2: During POST at the beginning of system boot-up, press <F11> key, and

then a window for boot devices selection appears. Please select CD-
ROM as the boot device.

STEP 3: When you see the message on the screen, “Do you want to generate

Serial ATA driver diskette [YN]?”, press <Y>.

STEP 4: Then you will see these messages,

Please insert a diskette into the floppy drive.

WARNING! Formatting the floppy diskette will

lose ALL data in it!

Start to format and copy files [YN]?

Please insert a floppy diskette into the floppy drive, and press <Y>.

STEP 5: The system will start to format the floppy diskette and copy SATA drivers

into the floppy diskette.

Once you have the SATA driver diskette ready, you may start to install Windows

2000

/ Windows

XP / Windows

XP 64-bit / Windows

Vista

on your system directly without

setting the RAID configuration on your system, or you may start to use “RAID Instal-
lation Guide” to set RAID 0 / RAID 1 / RAID 0+1 / JBOD configuration before you install
the OS. Before you start to configure the RAID function, you need to check the
installation guide in the Support CD for proper configuration. Please find the document,
“Guide to SATA Hard Disks Installation and RAID Configuration”, at the following path in
the Support CD:

.. \ Information \ Manual \ RAID Installation Guide \ English.pdf