Asrock 760gm-gs3 用户手册
38
38
38
38
38
BIOS SETUP UTILITY
Main
Advanced
H/W Monitor
Boot
Security
Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Select Item
Enter Go to Sub Screen
F1
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
EZ Overclocking
Load Optimized CPU OC Setting
[Press Enter]
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[100]
[Auto]
Spread Spectrum
Boot Failure Guard
Boot Failure Guard
Advanced Clock Calibration
CPU Active Core Control
CPU Active Core Control
Boot Failure Guard Count
Processor Maximum Frequency
North Bridge
Processor Maximum Voltage
North Bridge
Processor Maximum Voltage
Maximum Frequency
x13.5 2700 MHZ
x10.0 20
1.325 V
x10.0 20
1.325 V
00 MHz
[Auto]
[Enabled]
[3]
[Disabled]
[Disabled]
[Enabled]
[3]
[Disabled]
[Disabled]
Multiplier/Voltage Change
[Manual]
Load Optimized mGPU OC Setting
[Press Enter]
Advanced Clock Calibration
This allows you to adjust Advanced Clock Calibration feature. The default
value is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and
[Per Core]. If you select [All Cores], you will see the option “Value (All
Cores)”. Configuration options: [+12%] to [-12%]. If you select [Per Core],
you will see the options “Value (Core 0)”, “Value (Core 1)”, “Value (Core 2)
” and “Value (Core 3)”. Configuration options: [+12%] to [-12%].
value is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and
[Per Core]. If you select [All Cores], you will see the option “Value (All
Cores)”. Configuration options: [+12%] to [-12%]. If you select [Per Core],
you will see the options “Value (Core 0)”, “Value (Core 1)”, “Value (Core 2)
” and “Value (Core 3)”. Configuration options: [+12%] to [-12%].
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configura-
tion options depend on the CPU core you adopt. The default value is [All
Cores].
tion options depend on the CPU core you adopt. The default value is [All
Cores].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
CPU Frequency Adjust
Use this to adjust processor frequency for all cores or separate core.
CPU Frequency Multiplier
For safety and system stability, it is not recommended to adjust the value of
this item.
this item.
Processor Voltage
It allows you to adjust the value of processor voltage. However, for safety
and system stability, it is not recommended to adjust the value of this item.
and system stability, it is not recommended to adjust the value of this item.