Asrock 760gm-gs3 安装指南

 

7

 

Choose the RAID level you want. In the Define LD Menu section, press the spacebar to cycle through logical drive 

types, including RAID 0, RAID 1, RAID Ready, JBOD and RAID 10. 

 

While you are allowed to use any available RAID level for your bootable logical drive, it is recommended to use RAID 1 for most 

applications. 

 

Press the arrow key to move to Disk Assignments. Press the spacebar to toggle between N and Y for each available 

drive. Y means this disk drive will be assigned to the logical drive. Assign the appropriate number of disk drives to your 

logical drive. Then press <Ctrl-Y> to save your logical drive configuration. You have the option of using all of the disk 

drive capacity for one logical drive or allocating a portion to a second logical drive. 

 

 

 

Choose one of the following actions: 

1. 

: Please read “One Logical Drive” below. 

2. 

: Please read “Two Logical Drives” below. 

After selecting the logical drive in Disk Assignments as the above-mentioned procedures, press any key (except for 

<Ctrl-Y>) to use the full portion of the logical drive for one logical drive. Then please follow the steps below: 

1. 

Press <Esc> to exit to the Main Menu.   

2. 

Press <Esc> again to exit the Utility.   

3. 

Press <Y> to restart your computer.   

You have successfully created a new RAID logical drive. Please install the operating system to your computer by