Asrock 4core1333-glan 用户手册

2 0

2.8 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

FDD connector

(33-pin FLOPPY1)

(see p.10 No. 22)

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.10 No. 9)

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors

These four Serial ATAII (SATAII)

(SATAII_1 (Port0):

connectors support SATA data

see p.10, No. 17)

cables for internal storage

(SATAII_2 (Port1):

devices. The current SATAII

see p.10, No. 16)

interface allows up to 3.0 Gb/s

(SATAII_3 (Port2):

data transfer rate.

see p.10, No. 14)

(SATAII_4 (Port3):

see p.10, No. 13)

FLOPPY1

Pin1

the red-striped side to Pin1

connect the black end

to the IDE devices

connect the blue end

to the motherboard

IDE1

PIN1

SATAII_1 (Port0)

SATAII_4 (Port3)

80-conductor ATA 66/100 cable

SATAII_2 (Port1) SATAII_3 (Port2)

Serial ATA (SATA)

Either end of the SATA data cable

Data Cable

can be connected to the SATA /

(Optional)

SATAII hard disk or the SATAII

connector on this motherboard.