Asrock p45r2000 用户手册

3 0

the red-striped side to
Pin1

4_5

FSB3

1_2

FSB1

4_5

FSB2

FLOPPY1

Pin1

IDE1

PIN1

2.10 Onboard Headers and Connectors

4_5

FSB3

1_2

FSB1

3_4

FSB2

Primary IDE connector (Blue)

(39-pin IDE1, see p.11/12 No. 9)

Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper
caps over the headers and connectors will cause permanent dam-
age of the motherboard!

FDD connector

(33-pin FLOPPY1)
(see p.11 No. 29 or p.12 No. 28)

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

If you want to overclock the CPU you adopt to FSB1066 on this motherboard, you need
to adjust the jumpers. Please short pin4, pin5 for FSB2 jumper and pin4, pin5 for FSB3
jumper. Otherwise, the CPU may not work properly on this motherboard. Please refer to
below jumper settings.

If you want to overclock the CPU you adopt to FSB1333 on this motherboard, you need
to adjust the jumpers. Please short pin3, pin4 for FSB2 jumper and pin4, pin5 for FSB3
jumper. Otherwise, the CPU may not work properly on this motherboard. Please refer to
below jumper settings.

If you want to overclock the CPU you adopt to FSB1600 on this motherboard, you need
to adjust the jumpers. Please short pin3, pin4 for FSB2 jumper and pin3, pin4 for FSB3
jumper. Otherwise, the CPU may not work properly on this motherboard. Please refer to
below jumper settings.

3_4

FSB3

1_2

FSB1

3_4

FSB2

connect the black end
to the IDE devices

connect the blue end

to the motherboard

80-conductor ATA 66/100/133 cable

Note: Please refer to the instruction of your IDE device vendor for the details.