Asrock p45r2000 用户手册

4 9

STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure
SATAII as”, please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.18.1 step 2 on
page 45.
STEP 3: Install Windows

XP / XP 64-bit OS on your system. (Windows

2000 is

not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows

XP / XP

64-bit on your system. At the beginning of Windows

setup, press F6 to install a third-

party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing
the Intel

AHCI driver. After reading the floppy disk, the driver will be presented. Select

the driver to install according to the mode you choose and the OS you install. You may
select: "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP)" for Windows

XP or "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP64)" for Windows

XP 64-bit.

2.19

2.19 Installing Windows

Installing Windows

2000 / XP / XP 64-bit / Vista

/////

Vista

64-bit Without RAID Functions

If you want to install Windows

2000 / XP / XP 64-bit / Vista

/ Vista

64-bit OS

on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.

2.19.1 Installing Windows

2000 / XP / XP 64-bit

Without RAID F

ithout RAID F

ithout RAID Functions

unctions

If you want to install Windows

2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs

without RAID functions, please follow below steps.

Using SATA / SATAII HDDs and eSATAII devices with NCQ function

STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure
SATAII as”, please set the option to [IDE].
STEP 2: Install Windows

2000 / XP / XP 64-bit OS on your system.

Using SATA / SATAII HDDs and eSATAII devices without NCQ function

Since Windows

2000 RAID / AHCI driver is not provided by the chipset

vendor, RAID / AHCI functions are not supported under Windows

2000.