Asrock n68c-succ 用户手册

2 9

2.12

2.12 Driver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.

2.13

2.13 Installing Windows

Installing Windows

7 / 7 64-bit / Vista

Vista

64-bit / XP / XP 64-bit Without RAID Functions

If you just want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP 64-

bit on your SATA / SATAII HDDs without RAID functions, you don’t have to make a
SATA / SATAII driver diskette. Besides, there is no need for you to change the BIOS
setting. You can start to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP

64-bit on your system directly.

2.14

2.14 Installing Windows

Installing Windows

7 / 7 64-bit / Vista

Vista

64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP 64-bit OS

on your SATA / SATAII HDDs with RAID functions, please follow below procedures
according to the OS you install.

2.14.1 Installing Windows

XP / XP 64-bit With RAID

Functions

If you want to install Windows

XP or Windows

XP 64-bit on your SATA / SATAII

HDDs with RAID functions, please follow below steps.

STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen

Storage Configuration.

B. Set the “SATA Operation Mode” option to [IDE].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, “Generate Serial ATA driver diskette
[YN]?”, press <Y>.