Asrock am2nf6g-vsta 用户手册

2 6

2.15

2.15 Untied Overclocking T

Untied Overclocking T

Untied Overclocking Technology

echnology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS

setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can

operate under a more stable overclocking environment.

drive A:

press any key to start

Please insert a floppy diskette into the floppy drive, and press any key.

The system will start to format the floppy diskette and copy SATA /

SATAII drivers into the floppy diskette.

STEP 2: Set Up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATAII Operation Mode” option from [non-RAID] to [RAID].

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

2000 / Windows

XP / Windows

XP-64bit OS on

your system.

After step1, 2, 3, you can start to install Windows

2000 / Windows

XP / Windows

XP 64-bit OS on your system. At the beginning of Windows

setup, press F6 to install

a third-party SCSI or RAID driver. When prompted, insert the SATA / SATAII driver

diskette containing the NVIDIA

RAID driver. After reading the floppy disk, the driver

will be presented. Select the driver to install according to the mode you choose and

the OS you install.

NOTE. If you install Windows

2000 / Windows

XP / Windows

XP 64-bit on IDE

HDDs and want to manage (create, convert, delete, or rebuild) RAID functions

on SATA / SATAII HDDs, you still need to set up “SATAII Operation Mode” to [RAID]

first. Then, please set the RAID configuration by using the Windows RAID installation

guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide