Asrock A75 Pro4 用户手册

29

* ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to 
  ASRock website for the motherboard support list: http://www.asrock.com   

2.8  ASRock Smart Remote Installation Guide

ASRock Smart Remote is only used for ASRock motherboard with CIR header. 
Please refer to below procedures for the quick installation and usage of ASRock 
Smart Remote.

Step1.  Find the CIR header located next  
 

to the USB 2.0 header on ASRock 

 motherboard. 

Step2.  Connect the front USB cable to the 
 

USB 2.0 header (as below, pin 1-5) 

 

and the CIR header. Please make 

 

sure the wire assignments and the 

 

pin assignments are matched 

 correctly. 

Step3. Install 

Multi-Angle CIR Receiver to 

 

the front USB port. If Multi-Angle 

 CIR 

Receiver cannot successfully 

 

receive the infrared signals from 

 

MCE Remote Controller, please try 

 

to install it to the other front USB 

 port. 

1.  Only one of the front USB port can support CIR function. When the 

CIR function is enabled, the other port will remain USB function.

2. Multi-Angle 

CIR 

Receiver is used for front USB only. Please do not 

use the rear USB bracket to connect it on the rear panel. Multi-Angle 
CIR Receiver can receive the multi-direction infrared signals (top, 
down and front), which is compatible with most of the chassis on the 
market.

3.  The Multi-Angle CIR Receiver does not support Hot-Plug function. 

Please install it before you boot the system.