Asrock alivenf7g-fullhd 用户手册

3 5

2.14

2.14 Driver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.

2.15

2.15 Installing Windows

Installing Windows

2000 / XP / XP 64-bit / Vista

/ Vista

64-bit Without RAID Functions

If you want to install Windows

2000, Windows

XP, Windows

XP 64-bit, Windows

Vista

or Windows

Vista

64-bit on your SATA / SATAII HDDs without RAID

functions, please follow below procedures according to the OS you install.

Before installing Windows

2000 to your system, your Windows

2000optical disk

is supposed to include SP4. If there is no SP4 included in your disk, please visit the
below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.

htm#the_integrated_installation_fmay

2.15.1 Installing Windows

2000 / XP / XP 64-bit Without

RAID Functions

If you want to install Windows

2000 / Windows

XP / Windows

XP 64-bit on your

SATA / SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs with NCQ and Hot Plug functions

STEP 1: Set Up BIOS.
A.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [AHCI].

STEP 2: Make a SATA / SATAII driver diskette.
A.

Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack,
please choose the one for Windows

2000 / XP / XP 64-bit.)

During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.

When you see the message on the screen, “Generate Serial ATA driver
diskette [YN]?”, press <Y>.