Asrock p67 professional 用户手册

64

Chapter 3: UEFI SETUP UTILITY

3.1 Introduction

This section explains how to use the UEFI SETUP UTILITY to confi gure your 

system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You 

may run the UEFI SETUP UTILITY when you start up the computer. Please press 

<F2> or <Del> during the Power-On-Self-Test (POST) to enter the UEFI SETUP 

UTILITY, otherwise, POST will continue with its test routines.

If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by 

pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system 

chassis. You may also restart by turning the system off and then back on.

 

Because the UEFI software is constantly being updated, the 

following UEFI setup screens and descriptions are for reference 

purpose only, and they may not exactly match what you see on 

your screen.         

3.1.1  UEFI Menu Bar 

The top of the screen has a menu bar with the following selections: 

To set up the system time/date information

To set up overclocking features

Advanced  

To set up the advanced UEFI features

H/W Monitor  To display current hardware status

To set up the default system device to locate and load the 

Operating System

To set up the security features

To exit the current screen or the UEFI SETUP UTILITY 

Use <      > key or <      > key to choose among the selections on the menu 

bar, and then press <Enter> to get into the sub screen. You can also use the 

mouse to click your required item.