Asrock k7s41gx 用户手册

2 4

Appendix: Advanced BIOS Setup

This section will introduce you the following BIOS Setup menus: “Advanced,”

“Security,” “Power,” “Boot,” and “Exit.”

1. Advanced BIOS Setup Menu

Spread Spectrum: This field should always be [Disabled] for better system stability.

CPU Host Frequency:

[By Jumper]: It is recommended to select this option, which will let the CPU

host frequency of this motherboard determined by the jumper-setting.

[Manual]: This allows user to set CPU host frequency manually. However,

because the CPU host frequency of this motherboard is determined by the

jumper-setting, you must set the FSB jumper adjustment according to your

AMD CPU before you use this “Manual” option as the FSB setting in BIOS

setup to perform over clocking. This is not recommended unless you

thoroughly know the feature. Wrong setup may cause problems during

operation.

DRAM Frequency:

If set to [Auto], the motherboard will detect the inserted memory module(s) and

automatically assign appropriate frequency. You may select other value as

the operating frequency: [133MHz (DDR266)], [166MHz (DDR333)],

[200MHz (DDR400)]. Please note that the option [200MHz (DDR400)] will be

available only when K7S41 motherboard is installed.

Flexibility Option: The default value of this option is [Disabled]. It will allow better

tolerance for memory compatibility when it is set to [Enabled].

AMIBIOS SETUP UTILITY - VERSION 3.31a

Main

Advanced

Security

Power

Boot

Exit

Spread Spectrum

Configuration

CPU Host Frequency

Actual Frequency

DRAM Frequency
Flexibility Option

Chipset Configuration
Resource
Peripheral
System Hardware Monitor

[

Setup Help

]

By Jumper
133MHz
Auto
Disabled

<Enter> to enable or
disable the feature of
spread spectrum.

F1:Help

Esc:Exit

F9:Setup Defaults
F10:Save & Exit

+/-:Change Values

Enter:Select

Sub-Menu

:Select Item
:Select Menu

Disabled