Asrock imb-147 series 用户手册

This section explains how to use the UEFI SETUP UTILITY to configure 
your system. The UEFI chip on the motherboard stores the UEFI SETUP 
UTILITY. You  may  run  the  UEFI  SETUP  UTILITY  when  you  start  up  the 
computer.  Please  press  <F2>  or  <Del>  during  the  Power-On-Self-Test 
(POST) to enter the UEFI SETUP UTILITY, otherawise, POST will continue 
with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the sys-
tem by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button 
on the system chassis. You may also restart by turning the system off and 
then back on.

 

Because the UEFI software is constantly being updated, the following 

 

UEFI setup screens and descriptions are for reference purpose only, and 

 

they may not exactly match what you see on your screen.

The top of the screen has a menu bar with the following selections:
Main 

For setting system time/date information

Advanced 

For advanced system configurations

Displays current hardware status

For configuring boot settings and boot priority

For security settings

Exit the current screen or the UEFI Setup Utility