Asrock n68pv-gs 用户手册

3 2

2.14.2 Installing Windows

Vista

/ Vista

64-bit Without

RAID F

RAID Functions

unctions

If you want to install Windows

Vista

/ Windows

Vista

64-bit on your SATA /

SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs with NCQ and Hot Plug functions

Using SATA / SATAII HDDs without NCQ and Hot Plug functions

STEP 1: Set Up BIOS.
A.

Enter BIOS SETUP UTILITY

Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows

2000 / XP / XP 64-bit OS on your system.

Then you will see these messages,
Please choose:

1. Generate AHCI Driver diskette for Windows2000/XP

2. Generate RAID Driver diskette for Windows2000/XP

3. Generate AHCI Driver diskette for WindowsXP64

4. Generate RAID Driver diskette for WindowsXP64

5. Exit

Reboot system now

Press any key to continue
Please insert a floppy diskette into the floppy drive. Select your required
item on the list according to the mode you choose and the OS you install.
Then press any key.

The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.

STEP 3: Install Windows

2000 / XP / XP 64-bit OS on your system.

After making a SATA / SATAII driver diskette, you can start to install Windows

2000

/ XP / XP 64-bit on your system. At the beginning of Windows

setup, press F6 to

install a third-party AHCI driver. When prompted, insert the SATA / SATAII driver
diskette containing the NVIDIA

AHCI driver. After reading the floppy disk, the driver

will be presented. Select the driver to install according to the OS you install. The
drivers are as below:

A. NVIDIA nForce Storage Controller (required) Windows XP/2000

B. NVIDIA nForce Storage Controller (required) Windows XP64

Please select A for Windows

2000 / XP in AHCI mode. Please select B for Windows

XP 64-bit in AHCI mode.