Asrock ION 330HT-BD 安装指南

3

33

33

1.

Please use two new drives if you are creating a RAID 0 (striping) array

for performance. It is recommended to use two SATA drives of the same

size. If you use two drives of different sizes, the smaller capacity hard

disk will be the base storage size for each drive. For example, if one

hard disk has an 80GB storage capacity and the other hard disk has

60GB, the maximum storage capacity for the 80GB-drive becomes 60GB,

and the total storage capacity for this RAID 0 set is 120GB.

2.

You may use two new drives, or use an existing drive and a new drive

to create a RAID 1 (mirroring) array for data protection (the new drive

must be of the same size or larger than the existing drive). If you use

two drives of different sizes, the smaller capacity hard disk will be the

base storage size. For example, if one hard disk has an 80GB storage

capacity and the other hard disk has 60GB, the maximum storage

capacity for the RAID 1 set is 60GB.

3.

Please verify the status of your hard disks before you set up your new

RAID array.

Please backup your data first before you create RAID functions. In the

process you create RAID, the system will ask if you want to “Clear Disk Data”

or not. It is recommended to select “Yes”, and then your future data building will

operate under a clean environment.