Asrock ION 330HT 安装指南

1.3

Create Disk Array

After the system powers on, press <F2> key to enter BIOS setup utility.

Highlight Advanced and press <Enter>, then the main inter-face of BIOS setup

utility will appear. Please set the option “SATA Option Mode” to [RAID].

After adjusting the system BIOS to RAID mode, reboot your system. Wait until you

see the RAID software prompting you to press <F10>. The RAID prompt appears as

a part of the system POST and boot process prior to loading the OS. You have a few

seconds to press <F10> before the window disappears.

BIOS SETUP UTILITY

SATA Configuration

Advanced

Onboard SATA Controller

[Enabled]

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

SATAII_1
SATAII_2
SATAII_3
ESATA

[ATAPI CDROM]
[Hard Disk]
[Not Detected]
[Not Detected]

Options

Enabled
Disabled

SATA Operation Mode

[RAID]

Detecting storage devices . . .
1 SATA_2 Slimtype DVD A DS8A3S

Press F10 to enter RAID setup utility.

After you press <F10>, the MediaShield BIOS - Define a New Array window

appears. By default, RAID Mode is set to Mirrored, but please set it to Striped if you

want to create RAID 0. And the Stripe Block is set to Optimal as default. We take

RAID 0 for example to show you how to use MediaShield BIOS to create

RAID 0 (Striped). If you plan to use MediaShield BIOS to create other RAID array,

the Stripe block size is given in kilobytes, and affect how data is arranged on the

disk. It is recommended to leave this value at the default Optimal, which is 64KB,

but the values can be between 8KB and 128KB (8, 16, 32, 64, and 128KB). Then,

you have to assign the disks. The disks that you enabled from the RAID

Configuration BIOS setup page appear in the Free Disks block. These are the

drives that are available for use as RAID array disk, the operation procedures are

similar to the steps of creating RAID 0.