Asrock k7s41gx pro 用户手册

2 4

3.3

3.3 OC T

OC T

OC Tweak

weak

weaker Screen

er Screen

In the OC Tweaker screen, you can set up overclocking features.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Select Screen
Select Item

Enter Go to Sub Screen
F1

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

OC Tweaker

OC Tweaker Settings

CPU Host Frequency

[By Jumper]

Would you like to save current setting as
user defaults ?

Actual Frequency

[166]

Spread Spectrum
Boot Failure Guard

Over Vcore Voltage
Intelligent Energy Saver
DRAM Frequency
DRAM CAS Latency
VCCM Voltage

Boot Failure Guard Count

[Auto]
[Enabled]
[3]
[Normal]
[Disabled]
[Auto]
[Auto]
[2.6V]

Save 1st User Defaults

[User Default 1]

Load 1st User Defaults

[166]

[Enter] to select how
to set the CPU host
frequency.

CPU Host Frequency

[By Jumper]

It is recommended to select this option, which will let the CPU host

frequency of this motherboard determined by the jumper-setting.

[Manual]

This allows user to set CPU host frequency manually. However, because

the CPU host frequency of this motherboard is determined by the jumper-

setting, you must set the FSB jumper adjustment according to your AMD

CPU before you use this “Manual” option as the FSB setting in BIOS setup

to perform over clocking. This is not recommended unless you thoroughly

know the feature. Wrong setup may cause problems during operation.

Actual Frequeny

This is a read-only item, which displays the actual frequency of this

motherboard.

Spread Spectrum

This field should always be [Disabled] for better system stability.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Over Vcore Voltage

This feature allows you to increase the CPU Vcore voltage by 3% or 6%.

The default value is [Disabled].

It is not recommended to enable “Over Vcore

Voltage” feature. Doing so may cause CPU

damage.