Asrock motherboard 用户手册

下载
页码 59
4 1
4 1
4 1
4 1
4 1
STEP 3: Install Windows
®
 2000 / XP / XP 64-bit OS on your system.
After making a SATA / SATAII driver diskette, you can start to install Windows
®
 2000
/ XP / XP 64-bit on your system. At the beginning of Windows
®
 setup, press F6 to
install a third-party AHCI driver. When prompted, insert the SATA / SATAII driver
diskette containing the Intel
®
 AHCI driver. After reading the floppy disk, the driver will
be presented. Select the driver to install according to the mode you choose and the
OS you install. You may select: “Intel(R) 82801GR/GH SATA AHCI Controller (Desktop
ICH7R-Windows XP/2000)” for Windows
®
 XP/2000 or “Intel(R) 82801GR/GH SATA
AHCI Controller (Desktop ICH7R-Windows XP64)” for Windows
®
 XP 64-bit.
If you want to enable Hot Plug function on eSATAII ports but you install OS
on IDE HDD, please skip step 2.
STEP 1: Set Up BIOS.
A.
   Enter BIOS SETUP UTILITY
  Advanced screen
IDE Configuration.
B.
Set “ATA/IDE Configuration” to [Enhanced], and then in the option
“Configure SATA as”, please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.17.1 step 2 on
page 37.
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set up BIOS.
A.
   Enter BIOS SETUP UTILITY
  Advanced screen
IDE Configuration.
B.
Set “ATA/IDE Configuration” to [Enhanced], and then in the option
“Configure SATA as”, please set the option to [IDE].
STEP 2: Install Windows
®
 2000 / XP / XP 64-bit OS on your system.
2.18.2   Installing Windows
2.18.2   Installing Windows
2.18.2   Installing Windows
2.18.2   Installing Windows
2.18.2   Installing Windows
®
 Vista
 Vista
 Vista
 Vista
 Vista
TM 
TM 
TM 
TM 
TM 
/ Vista
/ Vista
/ Vista
/ Vista
/ Vista
TM
TM
TM
TM
TM
 64-bit Without
 64-bit Without
 64-bit Without
 64-bit Without
 64-bit Without
    RAID Functions
    RAID Functions
    RAID Functions
    RAID Functions
    RAID Functions
If you want to install Windows
®
 Vista
TM
 / Vista
TM
 64-bit OS on your SATA / SATAII
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug
functions
STEP 1: Set Up BIOS.
A.
   Enter BIOS SETUP UTILITY
  Advanced screen
IDE Configuration.
B.
Set “ATA/IDE Configuration” to [Enhanced], and then in the option
“Configure SATA as”, please set the option to [AHCI].