Audioline 502 用户手册

1.  Connect the telephone cord to the socket marked 

T

 underneath the 

telephone, and then to the telephone network socket.

2.  A click will be heard when the modular plug is correctly in place.
3.  Lift the handset and listen for the dial tone. Your telephone is now 

operational.

The telephone can be wall mounted. This is done with two screws positioned 

vertically at a distance of 100 mm; the screws should then fit into the two 

‘keyholes’ at the back of the telephone. This product can also be mounted 

directly onto the standard wall plate (Australia only).

During a call the microphone can be disconnected for as long as the 

z

 button 

is pressed. 

If the number dialled is engaged or if the last number dialled is to be redialled, 

lift the receiver and press the redial button 

r

.

Press the recall button 

R

 followed by the extension number to transfer calls 

when connected to a PBX (TBR only).

Access to additional network services can be gained by using the recall button 

R

, 

*

 and 

#

 keys. Contact your network operator for more information.

The volume may be adjusted using the switch located on the handset.

The ringer can be set to low or high using the switch                 underneath 

the telephone.