3M X62w 用户手册
73
Schedule Settings (
32)
Schedule settings can be confi gured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
Example: If the IP address of the projector is set to 192.168.1.10:
There are three types of scheduling.
1) Daily: Perform the specifi ed operation at a specifi ed time every day.
2) Sunday ~ Saturday: Perform the specifi ed operation at the specifi ed time on a
1) Daily: Perform the specifi ed operation at a specifi ed time every day.
2) Sunday ~ Saturday: Perform the specifi ed operation at the specifi ed time on a
specifi ed day of the week.
3) Specifi c Date: Perform the specifi ed operation on the specifi ed date and time.
• In Standby mode the power indicator will fl ash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [
] or
the breaker in a room is tripped. The power indicator will lights orange or green
when the projector gets is receiving the power.
when the projector gets is receiving the power.
NOTE
1) Enter [http://192.168.1.10/ ] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click [Logon] .
3) Click [Schedule Settings] on the main menu and select the required schedule
2) Enter the Administrator ID and Password and click [Logon] .
3) Click [Schedule Settings] on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the [Sunday].
select the [Sunday].
4) Click the [Enable] check box to enable scheduling.
5) Enter the Date (Month/Day) for specifi c date scheduling.
6) Click [Add] and set the time, command and parameters and click [Add This
5) Enter the Date (Month/Day) for specifi c date scheduling.
6) Click [Add] and set the time, command and parameters and click [Add This
Schedule]
when you want to add a command.
7) Click the [Delete] button when you want to delete a schedule.
8) Click the [Apply] button to save the settings.
8) Click the [Apply] button to save the settings.
4. Utilize projector – Advanced -