3M EX II 3000SP 用户手册
Integrating the EX II 3000SP Controller
11
3M Touch Systems Proprietary Information
Figure 2 EX II 3000SP Connector Locations
Figure 3 EX II 3000SP Overall Dimensions
Establishing the Data Connection
The EX II 3000SP controller requires that an RS-232 serial communication
cable be attached to connector JP3.
cable be attached to connector JP3.
You can use a 3M Touch Systems RS-232 cable (P/N 7311273). One end of
this cable plugs into the RS-232 connector (JP3) on the EX II 3000SP
controller. The other end, which has a 9-pin D connector, plugs into a serial
COM port on your PC. Table 1 describes the interconnections for the 3M
Touch Systems RS-232 cable.
this cable plugs into the RS-232 connector (JP3) on the EX II 3000SP
controller. The other end, which has a 9-pin D connector, plugs into a serial
COM port on your PC. Table 1 describes the interconnections for the 3M
Touch Systems RS-232 cable.