AirLive live-gsh5t 用户手册

7     

 

Live-GSH5T Gigabit Switch can be mounted on a wall with wall anchors and screws. 
 
To mount the Switch on wall, please follow the steps below: 
 

  Drill two holes, the distance between both of which should be 9 cm (such as the illustration 

below). 

  Insert wall anchors into these two holes. 
  Drive the screws into the top of the wall anchors. 
  Mount Live-GSH5T on the screws. 

 

 

 

 

 
 

 
 

 
Live-GSH5T Gigabit Ethernet Switch is primarily designed as a central switching device to provide 
Gigabit bandwidth to your existing Ethernet/Fast Ethernet LAN. It provides you with five built-in 
gigabit ports to establish gigabit backbone connections, relieving your network bottleneck. It fits 
well into the 10/100/1000 BASE-T cabling architecture to facilitate not only 10/100Mbps half/full 
duplex, but also 1000Mbps full-duplex transmission speed.  
 
The five RJ-45 station ports (Auto MDI/MDI-X) all require Cat. 5 twisted-pair UTP/STP cable for 
connection. When configuring within the 10/100/1000BASE-TX cabling architecture, the UTP 
cabling distance should be within a maximum distance of 100m. 
 
 
The table below describes when to use straight-through or crossover cable: 
 

RJ-45  

9 cm