audio-design ix1000.1 用户手册
2
IX AMPLIFIERS
IX.1-SERIES AMPLIFIERS Owner’s Manual
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment.
Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er. Use the IXSM
mounting bracket (sold separately) to stack IX amplifi ers of different sizes.
behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment.
Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er. Use the IXSM
mounting bracket (sold separately) to stack IX amplifi ers of different sizes.
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Model:
IX500.1
IX1000.1
RMS Power
@ 14.4V, 4
@ 14.4V, 4
Ω mono, 1% THD+N
@ 14.4V, 2
Ω mono, 1% THD+N
275W x 1
500W x 1
500W x 1
550W x 1
1000W x 1
1000W x 1
Length
9-3/8” (238mm)
Height
2-3/16” (55mm)
Width
7-7/8” (200mm)
Frequency Response ± 1dB
25Hz–200Hz
Signal-to-noise Ratio
95dB, A-weighted, re: rated power
Input Sensitivity
Low Level: 125mV–5V
High Level: 250mV–10V
High Level: 250mV–10V
Selectable Electronic Crossover
Variable lo-pass 50–200Hz, 24dB/octave
Bass Boost
Variable 0–18dB @ 40Hz
Subsonic Filter
24dB/octave, fi xed @ 25Hz
Maximum Effi ciency (2
Ω) >80%
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
genuine KICKER accessories and wiring.
IX500.1 / IX1000.1
2010 IX 500.1 1000.1 RevC.indd 2
2010 IX 500.1 1000.1 RevC.indd 2
11/12/2009 2:15:06 PM
11/12/2009 2:15:06 PM