APRILIA leonardo 150 用户手册
61
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
6%24)#!, !$*534).' /& 4(%
(%!$,)'(4 "%!-
To rapidly check the correct direction of the
beam, place the vehicle on flat ground, 10
m away from a wall.
To rapidly check the correct direction of the
beam, place the vehicle on flat ground, 10
m away from a wall.
Turn on the low beam, sit on the vehicle
and make sure that the beam projected on
the wall is slightly under the horizontal line
of the headlight (about 9/10th of the total
height).
and make sure that the beam projected on
the wall is slightly under the horizontal line
of the headlight (about 9/10th of the total
height).
To adjust the headlight beam:
◆
Turn the appropriate screw (1) with a
screwdriver.
screwdriver.
By TURNING IT CLOCKWISE, you set
the beam upwards.
the beam upwards.
By TURNING IT ANTICLOCKWISE, you
set the beam downwards.
set the beam downwards.
+
(/2):/.4!, !$*534-%.4
/& 4(% (%!$,)'(4 "%!-
-
◆
Remove the front inner shield, see p. 54
( R E M O V I N G T H E F R O N T I N N E R
SHIELD).
( R E M O V I N G T H E F R O N T I N N E R
SHIELD).
◆
★
Unscrew and remove the two
screws (2).
NOTE
Depending on the adjustment to
be carried out, the screws (2) must be re-
placed with longer ones (supplied in kit).
placed with longer ones (supplied in kit).
◆
Position the appropriate spacers (sup-
plied in kit) between the headlight fasten-
ing points and the front outer shield, ac-
cording to the type of adjustment to be
carried out.
plied in kit) between the headlight fasten-
ing points and the front outer shield, ac-
cording to the type of adjustment to be
carried out.
NOTE
Use fastening screws suitable for
the selected spacers.
◆
★
Insert and tighten the two screws
(2).