Alinco dj-v17t 用户手册

下载
页码 65
5.Useful Functions
5
35
This function automatically stops transmission when a preset time is elapsed.
5.6.1 Setting TOT
1. Press the FUNC key, and while 
is displayed on the LCD, press the 
key.  T-
OFF is displayed on the LCD.
2. Rotate the dial to change the TOT setting time.
The maximum setting for the TOT time is 450 seconds.
3. Press any key other than the MONI key to complete the setting.
5.6.2 TOT Operation
When the preset time is about to be elapsed, a beep sounds to alert that the unit is
forced to quit transmitting.  Release PTT key to quit transmitting otherwise the TOT
penalty may be activated.  Refer to page 47 for TOT penalty time setting.
Press the FUNC key, and while 
is displayed on the LCD, press the MONI key to
illuminate the display and DTMF keypad.
• The backlight automatically switches off if there is no key operation for 5 seconds.
• Pressing any key other than the LAMP key extends the LAMP function for another 5
seconds.
• Turning on the power while pressing the MONI key illuminates the backlight
permanently.  Repeat the same to turn it off.
• When the lamp is set for the "permanent-on" position, pressing the FUNC key then
the MONI key to turn on/off the backlight.
NOTE:
The LAMP function consumes battery.  The "permanent-on" position is
recommended only for the operation using an external power source.
Lamp
5.7
OFF
30
60
90
------
450
(unit: seconds)
Time-Out-Timer (TOT)
5.6