Alinco dj-v17t 用户手册

7.Special Functions

Use this function when the receiving signal is interfered by strong signals of nearby

channels.  When you activate this function, the transceiver attenuates the receiving

sensitivity.

1. Press the FUNC key, and while 

is displayed on the LCD, press the 

key.

2. Rotate the dial to change the ATT level.  There are 2 levels; ATT-1 attenuates the

received signal by 10dB and ATT-2 does 20dB.  Press any key other than the 

or MONI key to complete setting.  Observe that "

" appears on the display.

Press the 

key in the setting sequence to display "ATT-OFF" then press any

key other than the 

or MONI key to turn off this function.  Observe that

"

" disappears from the display.

Repeating improper recharge of the Ni-MH battery pack may cause so-called the

"memory effect" that the battery holds less charge.  To avoid this, it is recommended

to fully discharge the battery pack then full charge.  This function helps discharging

the battery pack.  Please remove the unit from a charger or a DC cable before this

operation.

1. Activate the Keylock (page 32).

2. Press the 

key twice, the 

key twice, the

key twice and then the 

key twice.

"DISCHG" will be displayed on the LCD, and the

battery-refresh starts.

3. To cancel this operation, just turn off the unit, turn it on again, then unlock the

Keylock function.

4. The unit will turn off automatically when finished the refresh.

7.2

ATT-1

ATT-2

7.1