australian-monitor amis26 产品宣传册

Power Input

24 VDC (regulated); 12VA max.

Output Mic/Line Switch

28dB

Noise

-89dB

Frequency Response

(0dB/-3dB) 10Hz - 50kHz

Total Harmonic Distortion

Line In (XLR/RCA) 0.02%; Mic In (XLR) 0.1%

Crosstalk

Better than 80dB

Phantom Power

24VDC

Input Sensitivity

Line (XLR) 775mV (0dB); Mic (XLR) 10mV (-37dB); 

Line (RCA) 775mV (0dB)

Dimensions

Dimensions: 44.0 x 482.0 x 168.0 (H x W x D) mm

Weight

Net 2.5 kg (5.5 lb), Shipping 3.0 kg (6.6 lb)

• All measurements done with levels set In/Out at 0dB; 

• All measurements referenced to 0dBu (0.775mV)

Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (

ABN 78 001 345 482

), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698   VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977   QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237   WA Tel: (08) 9228 4222 Fax: (08) 9228 4233   

SA Tel: (08) 8352 4444 Fax: (08) 8352 4488   NZ Tel: (09) 415 9426 Fax: (09) 415 9864 Export Enquiries: international@audiotelex.com.au   

Website: www.australianmonitor.com.au

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The distribution amplifier shall be a high quality two input, six output distribution 

1RU device. The unit will have two inputs which can be balanced or unbalanced 

and each input’s sensitivity can be switched between Mic and Line level via dip 

switches. Additionally these front panel dip switches will allow any of the inputs to be

routed to any of the six outputs. The units shall provide a four segment LED level

meter per input.

The unit shall provide 24 VDC Phantom power which is to be individually switchable

per input. 

The units outputs shall be balanced or unbalanced and feature up to -60dB of atten-

uation so that they can be run as any combination of line level or mic level outputs.

The distribution amplifier shall be an Australian Monitor Installation Series AMIS26.