Autotek autocad raster design 2010 用户手册

ProdNameShort searches along the AutoCAD project files search path for an
image filename that matches the name of your drawing (the main image),
but you can select which image types (file extensions) you want it to search
for. For more information about setting the project files search path, see the
AutoCAD online Help.

1 Click Image menu  ➤  Options. The 

 (page 351)

dialog box is displayed.

2 Click the Paths tab.

3 Under AutoPaste, select AutoInsert.

NOTE If you try to open a drawing that you created in GSX or ESP but you
do not enable AutoPaste, then your drawing loads but your images are not
displayed. To manually insert them, click Image menu  ➤  Insert.

4 Select Prompt before AutoInsert if you want ProdNameShort to prompt

you to insert the image it locates. Clear this check box if you want to
insert the image automatically without prompting.

5 Specify which file types you want ProdNameShort to search for by

choosing a file extension from the list, then add it to the Extension List.
ProdNameShort searches for the image types in the order they appear in
this list. After it locates an image of the type specified, it stops searching.

6 Click OK to accept your changes and exit the dialog box.

NOTE ProdNameShort does not perform an AutoPaste if there are image
references already saved in the drawing (for example, if it is a drawing
containing images you saved using version 7.5 or above of ProdNameShort).

Menu

Image  ➤  Options

Raster Design Toolbar

Inserting Images From GSX or ESP | 257