Autotek autocad raster design 2010 用户手册
Quick Reference
Menu
Image ➤ Options
Raster Design Toolbar
Command Line
ioptions
Dialog Box
(page 359)
VTools Follower Settings
These settings specify the behavior of follower tools during vectorization.
Some settings apply only to the contour follower and the 3D polyline follower.
Some settings apply only to the contour follower and the 3D polyline follower.
TIP If you are using vector separation to control the layer and polyline width of
vectors created from the Contour Follower, it is a good idea to use the same value
for the Elevation Interval and the Minor Interval on the Contour tab of the Vector
Separation Options dialog box. For more information, see
vectors created from the Contour Follower, it is a good idea to use the same value
for the Elevation Interval and the Minor Interval on the Contour tab of the Vector
Separation Options dialog box. For more information, see
(page 244).
To change the VTools Follower Settings
1 Click Image menu ➤ Options. The
(page 351)
dialog box is displayed.
2 Click the VTools Follower tab.
3 If you want to change the color ProdNameShort uses to mark the progress
of the follower, click Select and choose a new follower color.
4 If you want ProdNameShort to automatically pan to display the current
decision point on screen, select Pan to Decision Point.
5 If you want ProdNameShort to automatically close polylines and contour
objects where the endpoints are within a tolerance distance, select End
Current Polyline If Closed Loop Detected. This setting is useful for closing
loops across labels in contour lines.
Current Polyline If Closed Loop Detected. This setting is useful for closing
loops across labels in contour lines.
270 | Chapter 10 Configuring Raster Design