HP consumer dv7-6b56nr notebook a1t84uar#aba 用户手册
![HP](https://files.manualsbrain.com/attachments/29005dca542c93ad59e01e223583dbd51961550d/common/fit/150/50/3931a36faa9f1af0627fe52b73d277ccf98e5d18c55433f253353db13ee5/brand_logo.jpeg)
4–52
Maintenance and Service Guide
Removal and replacement procedures
4. Remove the fan/heat sink assembly 3 by lifting it straight up.
✎
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
board each time the fan/heat sink assembly is removed. Thermal paste is used on the processor 1 and the heat
sink section 2 that services it. Thermal pads are used on the Northbridge chip 3 and Northbridge contact 4, the
graphics subsystem chip 5 and graphics/heat sink contact 6. Replacement thermal material is included with all
fan/heat sink assembly, system board, and processor spare part kits.
board each time the fan/heat sink assembly is removed. Thermal paste is used on the processor 1 and the heat
sink section 2 that services it. Thermal pads are used on the Northbridge chip 3 and Northbridge contact 4, the
graphics subsystem chip 5 and graphics/heat sink contact 6. Replacement thermal material is included with all
fan/heat sink assembly, system board, and processor spare part kits.
✎
Steps 5 through 8 apply only to computer models equipped with UMA graphics subsystem memory.