HP proliant dl580 用户手册
Removal and replacement procedures 33
IMPORTANT: HP recommends troubleshooting the system using port 85 codes before replacing the system
board. Refer to "Troubleshooting the system using port 85 codes (on page
troubleshooting procedures.
1.
Power down the server (on page
2.
) and media drive blanks
3.
4.
5.
Remove the processor module ("
6.
Extend or remove the server from the rack ("
7.
Remove the access panel ("
8.
Remove the media board ("
9.
Remove the SCSI backplane ("
10.
Remove all system fans ("
11.
12.
Remove the PCI-X Hot Plug basket ("
13.
Disconnect the cable from the PCI-X Hot Plug mezzanine board, if installed.
14.
Remove the system cage ("
15.
Unlock the latch and open the lever.