HP proliant dl580 用户手册
Server component identification 71
Item Description
Status
5
DIMM LEDs (1–4)
Off = Normal or DIMM not installed
Amber = Uncorrectable error detected or
correctable error threshold reached
correctable error threshold reached
Flashing amber = DIMM configuration error
6 Spare
Off = Board not online or board not
configured for Online Spare Memory mode
configured for Online Spare Memory mode
Amber = Correctable error threshold
reached; server is in degraded Online
Spare Memory mode
reached; server is in degraded Online
Spare Memory mode
Flashing amber = Memory configuration
error*
error*
Green = Online Spare Memory mode
7 Mirrored
Off = Board not online or board not
configured for Hot-Plug Mirrored Memory
mode
configured for Hot-Plug Mirrored Memory
mode
Amber = Server is in degraded Hot-Plug
Mirrored Memory mode
Mirrored Memory mode
Flashing amber = Memory configuration
error*
error*
Green = Hot-Plug Mirrored Memory mode
8 RAID
Off = Board not online or board not
configured for Hot-Plug RAID Memory mode
configured for Hot-Plug RAID Memory mode
Amber = Server is in degraded Hot-Plug
RAID Memory mode
RAID Memory mode
Flashing amber = Memory configuration
error*
error*
Green = Hot-Plug RAID Memory mode
9
Board
Off = Power off or locking switch unlocked
Amber = Memory error detected
Flashing amber = Memory configuration
error*
error*
Flashing green = Board is rebuilding
Green = Normal
* AMP configuration errors occur when the current memory configuration is not valid for the configured
AMP mode:
AMP mode:
•
If the mode selected is the desired mode, modify the DIMM or board configuration to support the
desired mode. For more information, refer to "Memory options ("
desired mode. For more information, refer to "Memory options ("
•
If the mode selected is not the desired mode, run RBSU and change the AMP mode. For more
information, refer to the section "HP ROM-Based Setup Utility (on page
information, refer to the section "HP ROM-Based Setup Utility (on page
NOTE: If the Spare, Mirrored, and RAID LEDs are off, the server is in Advanced ECC mode. Refer to "HP
ROM-Based Setup Utility (on page
)" for more information.