HP qms 1660 用户手册
Optional
Network
Interfaces
6-41
Printer Options
4
Attach the NIC.
a
Position the NIC so the port slides into the opening you just
created.
created.
b
Snap the plastic standoff onto the controller board.
c
Snap the NIC onto the 80-pin connector and the plastic
standoff, both on the controller board.
standoff, both on the controller board.
It’s okay to push down gently with your thumb positioned on
the NIC right over the connector.
the NIC right over the connector.
5
Secure the NIC to the printer with the screws you removed
earlier.
earlier.
6
Replace the controller board and printer covers.
Use the instructions in the “Replacing the Printer and Controller
Board Covers” section of this chapter.
Board Covers” section of this chapter.
7
Reconnect all interface cables and the power cord, and then
turn on the printer.
turn on the printer.