HP sas dl360 用户手册
Hardware options installation
49
Installing a SAS or SATA hot-plug hard drive
1. Power down the server ("Powering down the server" on page
2. Remove the existing hard drive blank or hard drive from the drive bay
3. Open the release latch to prepare the drive for installation.
4. Install the drive.
5. Determine the status of the drive by observing the drive LEDs ("Identifying
6. Resume normal server operations.
Installing a multi-bay device
1. Power down the server ("Powering down the server" on page
2. Push the multi-bay device ejector button and eject the device or blank.