HP sas dl360 用户手册

 

For more information, refer to the HP ROM-Based Setup Utility User Guide on 
the Documentation CD or the HP website 
(

). 

 

After the auto-configuration process completes, or after the server reboots upon 
exit from RBSU, the POST sequence runs, and then the boot option screen is 
displayed. This screen is visible for several seconds before the system attempts to 
boot from either a diskette, CD, or hard drive. During this time, the menu on the 
screen allows you to install an operating system or make changes to the server 
configuration in RBSU. 

 

BIOS Serial Console allows you to configure the serial port to view POST error 
messages and run RBSU remotely through a serial connection to the server COM 
port. The server that you are remotely configuring does not require a keyboard 
and mouse.  

For more information about BIOS Serial Console, refer to the BIOS Serial 
Console User Guide on the Documentation CD or the HP website 
(

). 

 

1. 

2.  Access RBSU by pressing the F9 key during powerup when the prompt is 

displayed in the upper right corner of the screen. 

3.  Select System Options. 

4.  Select Advanced Memory Protection. 

5.  Select Online Spare with Advanced ECC Support. 

6.  Press the Enter key. 

7.  Press the Esc key to exit the current menu or press the F10 key to exit 

RBSU. 

Install the required DIMMs ("Online spare memory configuration" on page