Canon A3100ISRED 用户手册
Shooting Long Exposures
84
Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
1
Choose
≈.
●
Follow Steps 1 – 2 on p. 55 to choose
≈.
2
Choose the shutter speed.
●
Press the
o button.
●
Press the
qr buttons to select the shutter
speed, then press the
m button.
3
Confirm the exposure.
●
When you press the shutter button halfway,
the exposure for the chosen shutter speed
will appear on the screen.
the exposure for the chosen shutter speed
will appear on the screen.
Red-eye correction may be applied to areas other than red eyes. For
example, when red make-up has been used around eyes.
example, when red make-up has been used around eyes.
•
You can correct recorded images (p. 108).
•
You can also display the screen in Step 2 by pressing the
r button,
then the
n button.
•
The brightness of the image may differ from the brightness of the
screen in Step 3 when the shutter button was pressed halfway.
screen in Step 3 when the shutter button was pressed halfway.
•
When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
•
If you attach the camera to a tripod, you should set the [IS Mode] to
[Off] (p. 123).
[Off] (p. 123).
If the flash fires, the image may be overexposed. If this happens, set the
flash to
flash to
! and shoot.
CO
PY