Canon BJC-6200 服务手册

The printer has a Service Mode for accessing service settings and executing test printouts. The operations
can be selected via the operation panel buttons.

1) With the printer turned off, hold down the 

RESUME button

and press and hold the 

POWER button

(the green indicator lights).

2) While holding down 

POWER button

, release the 

RESUME button

and then press the 

RESUME button

twice in succession. Then release both the 

RESUME button

and 

POWER button

.

(Each time the 

RESUME button is pressed

, the indicator's color toggles between orange and green.)

3) During the printer initialization, the green indicator blinks. When the green indicator stops blinking and

lights on, press the 

RESUME button

the stipulated number of times to execute the desired operation

listed below.

(Each time the 

RESUME button 

is pressed, the indicator's color toggles between orange and green.)

4) After making the selection, press the 

POWER button

. The green indicator lights and the function will

be executed.
(After the function is executed, the printer will power off.)

* After selecting model setting, press the 

RESUME button

the number of times indicated below to set

the product type.
(During the initialization, the green indicator blinks. Each time the 

RESUME button

is pressed, the

indicator's color toggles between orange and green.)

After selecting the model, press the 

POWER button

to finalize the setting.

(After the printer executes the function, it will turn off.)

Before entering the service mode, install the BJ cartridges. The service mode cannot be

executed without the cartridges installed.

After setting the model, confirm the setting with the service/factory test printout.

Part 2: Troubleshooting

BJC-6200

0 times

1 time

2 times

3 times
4 times
5 times
6 times

7 times or more

Lights in green

Lights in orange

Lights in green

Lights in orange

Lights in green

Lights in orange

Lights in green

Lights in orange

Service/factory test printout
EEPROM information printout
EEPROM initialization (All the information will be reset to the

default, except for the model setting.)

Clears the waste-ink counter
Model setting*: The setting procedure is described below.
Ink availability check and print
Auto print head position adjustment
Power off/Carriage lock

0 times

1 time

2 times or more

Lights in green

Lights in orange

---

BJ F620 (Japan)
BJC-6200 (All other countries)
Saved as a reserved area where the setting will not be rewritten.