Canon i9900, i9950 服务手册
1 - 4
2. LIST OF ERROR DISPLAY / INDICATION
Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to
the printer.
the printer.
2.1 Operator Call Errors (LED Blinks in Orange)
LED
Blinks in
orange
Error Solution
Remarks
2 times
No paper. / Pick up failure. (Sheet
feeder unit) [1000]
feeder unit) [1000]
Set paper (set properly again.)
in the Sheet feeder unit, and
press the Resume/Cancel
button.
in the Sheet feeder unit, and
press the Resume/Cancel
button.
No CD-R tray [1001]*
1
Set the CD-R tray*
2
, and press
the Resume/Cancel button.
Adjust the mark on the
CD-R tray to the mark
on the paper output
tray. *
CD-R tray to the mark
on the paper output
tray. *
3
3 times
Paper jam. [1300]
Remove the jammed paper, and
press the Resume/Cancel
button.
press the Resume/Cancel
button.
4 times
No ink.
[1601/1611/1612/1613/1614/1634/
1635]
[1601/1611/1612/1613/1614/1634/
1635]
Replace the empty ink tank(s),
or press the Resume/Cancel
button.
or press the Resume/Cancel
button.
Pressing the
Resume/Cancel button
will exit the error
without ink tank
replacement, however,
ink may run out during
printing.
Resume/Cancel button
will exit the error
without ink tank
replacement, however,
ink may run out during
printing.
5 times
The print head is not installed [1401],
or it is not properly installed
(EEPROM data of the print head is
faulty) [1403/1405].
or it is not properly installed
(EEPROM data of the print head is
faulty) [1403/1405].
Install the print head properly,
and close the access cover.
Or, with the print head
installed, turn the printer off
and on.
and close the access cover.
Or, with the print head
installed, turn the printer off
and on.
The paper output tray is in the CD-R
printing position. (On paper printing)
[1850/1855]
printing position. (On paper printing)
[1850/1855]
Remove the CD-R tray*
2
, set
the paper output tray in the
paper printing position, and
press the Resume/Cancel
button.
paper printing position, and
press the Resume/Cancel
button.
6 times *
1
The paper output tray is in the paper
printing position. (On CD-R printing)
[1851/1856]
printing position. (On CD-R printing)
[1851/1856]
Set the paper output tray in the
CD-R printing position, set the
CD-R tray*
CD-R printing position, set the
CD-R tray*
2
, and press the
Resume/Cancel button.
7 times *
1
NO CD-R/DVD-R [1002] *1
Set the CD-R/DVD-R on the
CD-R tray*
CD-R tray*
2
, set the CD-R
tray*
2
, and press the
Resume/Cancel button.
8 times
Warning: The waste ink absorber is
almost full (approx. 95% of the
maximum capacity). [1700]
almost full (approx. 95% of the
maximum capacity). [1700]
Pressing the Resume/Cancel
button will exit the error, and
enable printing.
In repair servicing, replace the
bottom case/output tray unit
(bottom case unit), or the ink
absorbers.
button will exit the error, and
enable printing.
In repair servicing, replace the
bottom case/output tray unit
(bottom case unit), or the ink
absorbers.
The waste ink full
error (service call
error) may occur.
error (service call
error) may occur.
9 times
The connected digital camera or
digital video camera does not support
Camera Direct Printing. [2001]
digital video camera does not support
Camera Direct Printing. [2001]
After removing the cable
connecting the camera and the
printer, press the
Resume/Cancel button, and
re-connect the cable.
connecting the camera and the
printer, press the
Resume/Cancel button, and
re-connect the cable.
When a camera
supporting direct
printing is connected,
the LED blinks in
green two times.
supporting direct
printing is connected,
the LED blinks in
green two times.