Canon i9900, i9950 服务手册

下载
页码 50
 
1 - 16 
dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised. 
 
<Service mode operation procedures> 
1) 
With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power 
button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.) 
2) 
While holding the Power button, release the Resume/Cancel button. (Do not release the Power 
button.) 
3) 
While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power 
and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights 
alternately in orange and green, starting with orange.) 
4) 
When the LED lights in green, press the Resume/Cancel button the specified number of time(s) 
according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, 
the LED lights alternately in either orange or green, starting with orange.) 
5) 
After the function (menu) is selected, press the Power button. The LED lights in green, and the 
selected function is performed. (When the operation completes, the printer returns to the menu 
selection mode automatically.) 
 
 
 
 
Time(s) LED 
 
Function
 
 
Remarks 
0 times 
Green 
Power off 
When the print head is not installed, the carriage 
returns and locks in the home position. 
1 time 
Orange 
Service test print 
See Section 3.5 Verification Items, (1) Service test 
print. 
2 times 
Green 
EEPROM information print 
See Section 3.5 Verification Items, (2) EEPROM 
information print. 
3 times 
Orange 
EEPROM initialization 
 
4 times 
Green 
Waste ink counter resetting 
 
5 times 
Orange 
Destination settings 
After performing step 5), and follow the Destination 
settings procedures. 
6 times 
Green 
Print head deep cleaning 
 
7 times 
Orange 
Media sensor correction 
After performing step 5), and follow the Media sensor 
correction procedures. 
8 times 
Green 
CD-R test print 
Not used in servicing 
9 times 
Orange 
CD-R print position 
correction (horizontal) 
Not used in servicing 
10 times 
Green 
CD-R print position 
correction (vertical) 
Not used in servicing 
11 times 
or more 
 
Return to the menu selection
 
 
<Destination settings procedures> 
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according 
to the destination listed in the table below, and press the Power button. 
Time(s) LED 
Destination 
1 time 
Orange 
Japan: 
PIXUS 9900i 
2 times 
Green 
Overseas, non-support of CD-R printing (A4): 
i9900 
3 times 
Orange 
Overseas, non-support of CD-R printing (LTR):  i9900 (LTR) 
4 times 
Green 
Overseas, support of CD-R printing (A4): 
i9950 
5 times 
Orange 
Overseas, support of CD-R printing (LTR): 
i9950 (LTR) 
6 times 
or more 
 
Return to the menu selection 
Note:  After setting the destination, confirm the model name in the service test print or EEPROM 
information print. 
(See Section 3.5 Verification Items, (1) Service test print, or (2) EEPROM 
information print.)