Canon imageclass mf4150 用户指南
1
2
3
4
5
6
Back
5-10
Cannot receive a fax automatically.
Q
Is the machine set to receive automatically?
A
For the machine to receive faxes automatically,
receive mode must be set to <FaxOnly>,
<AnsMode>, <DRPD> or <FAX/TEL>. If you have
set <AnsMode>, confirm that an answering
machine is connected to the machine and that it is
turned on with an outgoing message properly
recorded. (See “Setting the Receive Mode,” on
p. 1-8.)
receive mode must be set to <FaxOnly>,
<AnsMode>, <DRPD> or <FAX/TEL>. If you have
set <AnsMode>, confirm that an answering
machine is connected to the machine and that it is
turned on with an outgoing message properly
recorded. (See “Setting the Receive Mode,” on
p. 1-8.)
Q
Is a document stored in memory, leaving little
or no memory available?
or no memory available?
A
Print, send, or delete any documents stored in
memory.
memory.
Q
Has an error occurred during reception?
A
Check the LCD for an error message. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
Chapter 11, “Troubleshooting,” in the Basic Guide.)
A
Print an Activity Report and check for an error.
(See “ACTIVITY REPORT,” on p. 4-5.)
(See “ACTIVITY REPORT,” on p. 4-5.)
Q
Is paper loaded in the machine?
A
Make sure paper is loaded in the machine. (See
“Set Up the Paper Cassette and Load Paper,” in the
Starter Guide.)
“Set Up the Paper Cassette and Load Paper,” in the
Starter Guide.)
Q
Is the telephone cable connected properly?
A
Make sure the cable is connected properly. (See
“Connect Telephone Cables,” in the Starter Guide.)
“Connect Telephone Cables,” in the Starter Guide.)
Cannot receive a fax on both sides of the paper
Q
Is the two-sided printing switch set to ‘ON’?
A
Make sure that the two-sided printing switch is set
to ‘ON’. (See “Two-Sided Printing,” on p. 1-14.)
to ‘ON’. (See “Two-Sided Printing,” on p. 1-14.)