Canon multipass mp390 手册

Set-Up Sheet

Thank you for purchasing the Canon MultiPASS MP390. To prepare your machine for
use, please follow the instructions in this Set-Up Sheet before referring to any other
documentation.

READ THIS SHEET FIRST

Do not connect the USB cable until

, "Connect the USB

cable."

IMPORTANT

Setup procedures

Start

Setup flow

Setup procedures

End

This side explains the setup procedure for use without connecting to a computer. <Check packed contents, install and adjust machine>

These steps explain the setup procedure for use by connecting to a computer. <Install MP Drivers and Utility Software>

You can use the copy, photo print, fax functions.

You can use the print, PC fax, scan functions.

Connect

power cord

Connect

telephone line

Install Utility Software

Install print head

Install MP Drivers

Install ink tanks

Connect USB cable

Load print media

Align print head

Unpack and install

the machine

Unpack and install the machine.

Carefully remove all items from the box.

NOTE

When removing the machine from the
box, handle it with care and do not drop it.

Remove the protective material.

NOTE

After removing the protective material, do
not lift the machine by grasping the scan
unit.

Hold the bottom side.

Place the machine on a flat surface.

• Be sure to hold the machine by the

sides. Do not place anything in front
of the machine.

Remove all shipping tape from the
exterior of the machine.

• After removing the tape, remove the

protective sheet.

Do not grasp the
scan unit.

HT3-2145-000-V.1.0

Remove the
protective sheet.