Canon pixma mp180 用户手册

Chapter 9 

Routine Maintenance

„

It is important to identify the empty Cartridge using the LCD/LED and replace it.

z

<BLACK INK LOW> or <COLOR INK LOW> appears on the LCD (MP180) / the Black/Color Ink 
Lamp lights (MP160) when ink becomes low. Obtain a replacement tank as soon as possible.

z

<CHECK INK> appears on the LCD (MP180) / <E> and <4> appear alternately on the LED 
(MP160) when ink becomes empty during printing.
Printing will resume as soon as the FINE Cartridge is replaced and the Scanning Unit is closed.
z

Press [Stop/Reset] to cancel the current print job.

z

Press [OK] (MP180) / [Black] or [Color] (MP160) to resume printing with an empty FINE 
Cartridge. When printing is finished, replace the FINE Cartridge immediately. If you continue 
printing with an empty FINE Cartridge, it will be a cause of trouble.

* Be sure to press [OK] (MP180) / [Black] or [Color] (MP160) with all the FINE Cartridges 

installed. Printing does not resume if any of the FINE Cartridges are left uninstalled.

* If you continue to print with an empty FINE Cartridge, the ink level will not be detected 

correctly.

z

You can check the current ink level by pressing [COPY], [SCAN] or [MEMORY CARD]. The LCD 
will display the ink level for a few seconds.

(1) Indicates the remaining ink volume at four different levels.

Should missing characters or white streaks appear despite sufficient ink 
levels, see “When Printing Becomes Faint Or Color Is Incorrect” on 
page 75.

If an error message is displayed on the LCD/LED, a FINE Cartridge error 
has occurred and the machine cannot continue to print. See “An Error 
Message Is Displayed On The LCD/LED” on page 86.

Ex: