Canon pixma mp210 series 用户手册

Troubleshooting

„

„

„

Machine is not connected properly.

Make sure that the USB cable is securely plugged in to the machine and the 
computer.
z

If you are using a relay device such as a USB hub, disconnect it, connect the 
machine directly to the computer, and try printing again. If printing starts 
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.

z

There could also be a problem with the USB cable. Replace the USB cable 
and try printing again.

Your machine is not selected in Printer 
on the Print dialog box.

Select your machine’s name in Printer on the Print dialog box.
If your machine’s name does not appear in Printer, follow the procedure below 
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.

In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List in Printer.

(2)Check that your machine’s name is displayed in the list of printers and that 

the check box is selected.
In Mac OS X v.10.2.8, check that your machine’s name is displayed in 
Printer List.

(3)If your machine’s name is not displayed, click Add(+) to add the machine.

If you cannot add the machine, follow the procedure described in your setup 
sheet to reinstall the MP Drivers.

The ink absorber is almost full.

See “E, 8” (Ink absorber is almost full.) in “An Error Code Is Displayed on the 
LED” on page 44.

No response from connected digital 
camera or video camcorder. / 
Connected digital camera or video 
camcorder is not compatible with this 
machine.

See “E, 9” (The digital camera or digital video camcorder connected is not 
compatible with this machine.) in “An Error Code Is Displayed on the LED” on 
page 44.

PictBridge compliant device is 
connected via a USB hub.

See “E, 1, 9” (PictBridge compliant device is connected via a USB hub.) in “An 
Error Code Is Displayed on the LED” on page 45.