Canon smartbase pc1210d, pc1230d, pc1270d 手册
SERVICE BULLETIN
FAX
Issued by Canon Europa N.V.
MODEL:
Smart Base PC1230D
No.:
PC1200S-008
Smart Base PC1210D
(FF-T01-L6-000029-01)
Smart Base PC1270D
Date:
30.08.02
LOCATION: ADF ASSEMBLY
SUBJECT :
CHANGE OF DESCRIPTION ON CLEANING LABEL/ADDITION OF A READ
AREA LABEL
AREA LABEL
Reason :
Measure for black lines due to smears on the copyboard glass when reading originals
from the ADF
(To show users the cleaning location)
from the ADF
(To show users the cleaning location)
Outline :
1. A "read area label" which indicates where to clean the copyboard glass is newly
set up.
set up.
Two pieces of this label should be used for the main unit with the ADF installed.
Regarding the attachment location for the read area label, please see the attached
pages.
Regarding the attachment location for the read area label, please see the attached
pages.
read area label
2. Change of the description on the cleaning label
2-1. Show the location to be cleaned in case that black lines appear on copy when
running originals from the ADF.
(The illustration is changed.)
2-2. Specify the chapter in the "User's Guide" to be referred to when black lines
appear on copy.
The cleaning label is shown below.
2-1. Show the location to be cleaned in case that black lines appear on copy when
running originals from the ADF.
(The illustration is changed.)
2-2. Specify the chapter in the "User's Guide" to be referred to when black lines
appear on copy.
The cleaning label is shown below.
An insertion containing the same description as in the cleaning label is included in the
User's Manual. Please find attached the insertion in question. Be sure to hand over
the insertion to a user when you provide him/her with a service part of the cleaning
label.