Nikon DS-2MBWC 用户手册
![Nikon](https://files.manualsbrain.com/attachments/3ff80140a6dfa7b8036895fb596fbb4fa44edc94/common/fit/150/50/42a13d03876824d221fcbe617ea67d2f103bdb8a786c466993e9f8544536/brand_logo.png)
.
NETWORK
.
VI Basic Operations
4 Using the DS-L1 via a Network
- 102 -
4.5
Using Telnet Commands to Operate on the DS-L1
You can use Telnet commands to operate the DS-L1 from your PC.
NOTE: Always be sure to consult the network administrator in your organization
before executing Telnet commands. Your organization’s network may have
been set up in a unique manner, so invalid operations could cause a
problem on your network.
been set up in a unique manner, so invalid operations could cause a
problem on your network.
Enter the IP address of the DS-L1 from the MS-DOS prompt (command prompt) of
Windows to connect to the DS-L1.
(Example: Telnet 192.168.10.2)
Windows to connect to the DS-L1.
(Example: Telnet 192.168.10.2)
Commands
Specify the commands listed in this manual.
A detailed command list is available from Nikon. If you wish to have one, please
contact your nearest Nikon representative.
contact your nearest Nikon representative.