Nikon DS-2MBWC 用户手册

.

MICROSCOPE

.

   

VI Basic Operations 

 

6  Using the Microscope Control 

- 142 - 

 

 

 

 

 

 

Compatible only with microscope incorporating the DIH-E. 

 

1）  Connect the camera head to the rear port of the DIH. 

2）  Confirm that the check box 

  that will be selected (marked by a check mark) 

when the camera head is connected to the front port of the DIH is unselected now. 

3） 

If you want to reduce the magnification of the optical zoom below its current 
magnification, select the 

  icon in the optical zoom column 

  . Conversely, if you 

want to increase the magnification, select the 

  icon, to change the magnification. 

 

NOTE: 
* 

For the microscopes incorporating the DIH-M, only the magnification is 
displayed. 

* 

The magnification changes in increments of x0.1, and can be changed in the 
range x0.8 to x2.0. 

* 

The current magnification is displayed on the "microscope status 
display/microscopy setup menu" (MIC Info menu). 

* 

When you change the optical zoom, the episcopic illumination field 
diaphragm is also changed accordingly. For more information, refer to the 
instruction manual for your microscope. 

* 

When you change the optical zoom, the overlay data, excluding the XY scale 
and the scale currently displayed, is deleted. For detailed information about 
the overlay data, refer to the description of the "TOOL" menu. 

* 

When you change the optical zoom, the XY scale and the scale currently 
displayed also are changed. 

 

 

Compatible only with microscope incorporating the DIH-E. 

 

1）  Select the optical path change icon to change optical paths. 

2）  The current status of the optical path is indicated by a picture depicting the optical path 

change icon. 
(

for Binocular, 

  for Front port, 

  for Rear port)