Samsung dvd-v340 用户手册
ENG-25
Recording from Another
VCR or Camcorder
VCR or Camcorder
Using the TV Buttons on the
Remote Control
Remote Control
★
(DVD-V540 Only)
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
camcorder.
another video source, such as another VCR or a
camcorder.
☛
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is
to be copied, to the appropriate RCA audio and
video input connectors on the rear of your DVD-
VCR, as indicated on page 8.
to be copied, to the appropriate RCA audio and
video input connectors on the rear of your DVD-
VCR, as indicated on page 8.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
source (VCR or camcorder).
4
Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR: LINE IN for
the RCA input.
appropriate input on your DVD-VCR: LINE IN for
the RCA input.
5
Start playing back the cassette to be copied.
6
Hold REC (
●
) down for a while to start recording
on your DVD-VCR.
7
When you have finished recording, press
■
on
both VCR and DVD-VCR.
➢
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to
the television (see page 7~8 for further details)
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
follow the instructions below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand
Codes
Brand
Codes
SAMSUNG 01 to 06
PHILIPS
02, 20, 22
AKAI
09, 23
SABA
13, 14, 22 to 24
GRUNDIG
09, 17, 21
SONY
15, 16
LOEWE
02
THOMSON13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
Result: If your television is compatible with the
remote control, it will switch off. It is now
programmed to operate with the remote control.
remote control, it will switch off. It is now
programmed to operate with the remote control.
‚
➢
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
television brand, try each one in turn until
you find one that works.
☛
When you change the batteries in the remote
control, you must reprogramme the code, following
the same procedure.
control, you must reprogramme the code, following
the same procedure.
You can then control the television using the following
buttons.
buttons.
Button
Function
STANDBY/ON
Used to switch the television and
DVD-VCR on and off.
DVD-VCR on and off.
TV or VCR
Used to switch between the TV and
VCR modes.
VCR modes.
INPUT SEL.
Used to select an external source.
VOL + or –
Used to adjust the volume of the
television.
television.
PROG/TRK
Used to select the required
( or )
programme.
TV MUTE
Used to mute the volume of the
television.
television.
➢
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
work on all televisions. If you encounter
problems, operate the television directly.
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 25