Samsung dvd-v340 用户手册
ENG-7
Connecting DVD-VCR to the
TV using the Coaxial Cable
TV using the Coaxial Cable
Display Indicators
To receive television programmes a signal must be
received from one of the following sources:
received from one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
VCR are switched off before connecting the
cables.
1
Remove the aerial or network input cable from the
television.
television.
2
Connect this cable to the 75
Ω
coaxial socket
marked on the rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the socket
on your DVD-VCR.
on your DVD-VCR.
4
Plug the other end of the coaxial cable into the
connector previously used for the aerial on the
television.
connector previously used for the aerial on the
television.
5
To obtain better quality pictures and sound on your
television, you can also connect your DVD-VCR to
the television via the RCA cable (see next page) if
your television is equipped with this type of
connection.
television, you can also connect your DVD-VCR to
the television via the RCA cable (see next page) if
your television is equipped with this type of
connection.
6
1
The DVD Deck is active
2
A DVD, CD, VCD, or SVCD is loaded
3
The time, counter position, time remaining or
current deck status is displayed
current deck status is displayed
4
VHS tape is inserted
5
The VCR Deck is active
6
A Timer Recording is programmed or in progress.
1 2
3 4 5
TV
Inserting Batteries in the
Remote Control
Remote Control
You must insert or replace the batteries in the remote
control when you:
control when you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer
◆ Find that the remote control is no longer
working correctly
1
Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
the battery compartment cover on the rear of the
remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking
care to respect the polarities:
care to respect the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
the remote control and pushing it back into place.
➢
Do not mix different battery types (manganese
and alkaline for example).
and alkaline for example).
2
4
3
1
TV
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 7