Samsung NX1000 用户手册
117
Wireless network >
Using Auto Backup to send photos or videos
•
If the PC supports the Wake on LAN (WOL) feature, you can turn on the
PC automatically by searching for the PC from your camera. (p. 121)
PC automatically by searching for the PC from your camera. (p. 121)
•
When you connect the camera to the WLAN, select the AP that is
connected to the PC.
connected to the PC.
•
The camera will search for available access points even if you are
connecting to the same access point again.
connecting to the same access point again.
•
If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
transfer will be interrupted.
•
While you are using this feature, only [Power] is available on your camera.
•
You can connect only one camera to the PC at a time for sending files.
•
The backup may be canceled due to network conditions.
•
Photos or videos can be sent to a PC one time only. Files cannot be sent
again even if you reconnect your camera to another PC.
again even if you reconnect your camera to another PC.
•
When there are no files in the camera memory, you cannot use this feature.
•
You must turn off Windows Firewall and any other firewalls before using this
feature.
feature.
•
You can send up to 1,000 files.
•
On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.
and can contain no more than 48 characters.