Samsung pl-42q91hp 用户手册
English-18
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels.
After the available channels are memorized, use the CH
After the available channels are memorized, use the CH
or CH
button to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an air or a cable system).
TV (i.e. an air or a cable system).
1. Press the MENU button to display the menu.
Press the …
… or †
† button to select “Channel”, then press the ENTER button.
2. Press the ENTER button select “Air/Cable”.
Press the …
… or †
† button to select “Air”, “STD”, “HRC” or “IRC”, then press the
ENTER button.
➢
➢
If you are using an Air antenna, leave “Air” displayed. If you are using a cable antenna,
press the …
press the …
… or †
† button to display the type of cable system: “STD”, “HRC” or “IRC”.
(If you are not sure which type of cable system you have, contact your cable company).
Press the EXIT button to exit.
➢
STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point the signal source has been selected.
company to identify the type of cable system that exists in your particular area. At this
point the signal source has been selected.
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu
.
Press the …
… or †
† button to select “Channel”, then press the ENTER button.
2. Press the …
… or †
† button to select “Auto Program”, then press the ENTER button.
3. Press the ENTER button.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
After all the available channels are stored, the Auto program menu reappears.
Press the EXIT button to exit.
➢
➢
• All available analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
• It takes approximately 3 to 10 minutes to memorize channels.
Air/Cable
: Air
Auto Program
Channel Manager
Fine Tune
Color System
Channel Manager
Fine Tune
Color System
: Auto
Channel
T V
Move
Enter
Return
Air/Cable
: Air
Auto Program
Channel Manager
Fine Tune
Color System
Channel Manager
Fine Tune
Color System
: Auto
Channel
T V
Move
Enter
Air/Cable
:
Air
Auto Program
Channel Manager
Fine Tune
Color System
Channel Manager
Fine Tune
Color System
: Auto
Channel
T V
Move
Enter
Air
STD
HRC
HRC
IRC
Auto Program
Enter
Start
Air 3
Return
Return
Return
BN68-00866X-00Eng_0326 3/26/07 10:13 AM Page 18